SCB10 1250KVA Cast Resin Dry Type Transformer

SCB10-1250KVA cast resin dry type transformer has low no-load loss, obvious advantages of energy saving and environmental protection. It uses amorphous alloy core, which has a completely different crystal structure from silicon steel, which is easier to be magnetized, thereby greatly reducing the no-load loss of the transformer. The SCB10-1250KVA dry-type transformer is suitable for harsh environments with high fire protection requirements, large load fluctuations and dirty and humid environments. Such as: airports, power plants, metallurgical operations, hospitals, high-rise buildings, shopping centers, densely populated areas and special environments such as petrochemicals, nuclear power plants, and nuclear submarines.

1. Good heat dissipation conditions, long thermal life, extremely strong overload capacity, no forced air cooling under 120% long-term overload, IP45 conditions, long-term full-load operation

2 After the service life, the insulating material and copper wire can be easily separated and recycled, without polluting the environment

3. Extremely high safety and flame retardant properties, no smoke is generated under long-term combustion at 800oC high temperature

SCB10-1250KVA cast resin dry type transformer application

SCB10-1250KVA dry-type transformers are mainly used in high-rise buildings, commercial centers, airports, stations, subways, ships, chemicals, tunnels, mines, residential areas and other places with strict requirements for fire protection.

Features of SCB10-1250KVA cast resin dry type transformer

1. Good fire performance. The epoxy resin combined with glass fiber as the insulating material of the transformer has the characteristics of being inflammable and easy to extinguish, it will not cause arcing due to short circuit, flameproof and explosion-proof, and it can go deep into the load center to supply power.

2. Economical installation and operation. Epoxy transformers can be installed near the load, reducing installation costs and line energy consumption.

3. Maintenance-free and pollution-free, epoxy transformers are oil-free and maintenance-free, and will not pollute the environment due to oil seepage, and save a lot of maintenance work and costs.

4. Good moisture resistance. It can operate normally at a temperature of 100, and resume operation without pre-drying.

5. Good insulation performance and low partial discharge. Resistant to short circuit and lightning strike.

6. Low loss, high efficiency and low operating cost. The long-term operation benefits are obvious.

7. Low noise and strong heat dissipation capacity. Forced air cooling conditions, with 150 overload capacity.

8. It has anti-theft features. The copper coil is sealed by epoxy resin and glass fiber, and it is difficult to disassemble the copper wire and sell it, so it can prevent the transformer from being stolen.

9. It can be equipped with temperature display control configuration to provide reliable guarantee for the safe operation of the transformer.

10. The composition structure includes: high-voltage terminal, clamp, high-voltage connecting rod, high-voltage tap, high-voltage connecting piece, low-voltage coil, high-voltage coil, cooling air passage, pad, base, fan.

The performance index of the SCB10-1250KVA dry-type transformer produced by our company conforms to various standards. It has been proved by users that its operation is reliable and reaches the advanced level in the industry. SCB10-1250KVA dry-type transformer adopts foreign advanced manufacturing technology, design drawings and technical documents are complete, correct and clear, advanced production equipment, stable manufacturing process, complete measuring means, provide a solid guarantee for the production of high-quality products.