S13 1000Kva Oil Immersed Type Transformer Order

The S13 1000KVA oil immersed type transformer manufactured by our company has the characteristics of small size, light weight, high efficiency, low loss, low noise and strong operation stability. The company adheres to the principle of user-oriented, and meets the different requirements of users on products. Quality and customer first are the consistent tenet of our company.

Main features

1. Safe, fireproof, zero pollution, can operate directly in the load center;

2. High impact toughness, strong short-circuit resistance, small partial discharge, good thermal stability, high stability, strong and durable;

3. Good heat dissipation performance, strong operation ability, can increase the volume operation when forced air cooling;

4. The surface of the product is painted after degreasing, de-embroidering and sandblasting. It has good moisture-proof performance and can meet the special requirements of metallurgy, petrochemical systems and wet and cold dirty areas. Adapt to operation in high humidity and other extreme environments;

5. It has the characteristics of environmental protection, flame retardant, explosion-proof and maintenance-free;

6, small size, light weight, easy to transport goods;

7. The body and the fuel tank have a stable positioning structure, which makes it difficult to shift during transportation. The product can always remain stable in long-term operation;

8. The iron core material is made of silicon steel sheet with good magnetic permeability and low loss, which can effectively reduce no-load loss and noise. The iron core is constructed with multi-level full oblique joints, so that the magnetic field distribution at the interface of the iron core is better, reducing the no-load loss and noise; the coil should choose a suitable type of wire, such as paper-covered wire, which should be self-adhesive interchangeable wire, efficient Reduce load losses. It can effectively reduce the operating costs of the grid and customers.

Conditions of Use

Operating temperature: +40°C

Operating temperature: -25°C

Altitude:<1000m

Monthly mean relative humidity: 90% (20°C)

Installation location: Install in a place without fire, explosion hazard, severe pollution, chemical corrosion and severe vibration, indoor or outdoor.

Product advantages

S13 1000KVA oil immersed type transformer iron core is made of imported cold-rolled silicon steel sheets stacked, which greatly reduces no-load loss and no-load current, and bundles the iron core to ensure the tightness of the iron core and reduce noise.

High and low voltage windings are made of oxygen-free copper. Low-voltage windings of 500kVA and below use a two-layer barrel structure, 630kVA or above, use a double-helix or four-helix structure, and high-voltage windings use a double-layer barrel structure.

The transformer connection group uses Dyn11 to reduce the influence of harmonics on the power grid and improve the quality of power supply.

The transformer is a fully sealed structure, which increases the service life, free of hanging cores, and free of maintenance.

The evaluation noise value is less than the specification.

After the S13 1000KVA oil immersed type transformer is normally transported, it does not need to be checked by the hanging core, and the relevant parts can be installed, and the acceptance project experiment can be carried out. After reaching the standard, it can be put into operation.